Tuesday, December 1, 2009

DIY: Wine Bottle Light

This is a great idea

Wine light bottle

This past spring Daniel and I went on a road trip from San Francisco to the Grand Canyon. Along the way we stopped at Chateau Julien for a wine tasting. I wanted to do something with the empty bottle instead of throwing it in the recycling bin. So here it is!

You’ll need:

wine bottle light supplies

an empty wine bottle
a drill
safety glasses and gloves (just in case the bottle breaks)
1/2″ glass drill bit
masking tape
short strand of Christmas lights (with a plug only on one end)

How to:

1. Rinse out your wine bottle and remove the labels (if desired).

2. Place a piece of masking tape on the bottle where you want to drill the hole for the cord. The tape keeps the drill bit from slipping.

3. Put on your gloves and goggles and start drilling. Don’t apply too much pressure or you could break the glass. The drilling takes a long time. I spent about 30 minutes drilling the hole. Be patient!

wine bottle light hole

4. Once your hole is drilled rinse the glass shavings out of your bottle, and let the bottle dry.

5. Carefully feed the strand of Christmas lights into the hole you drilled.

6. TaaDaa!

wine bottle light

DIY: Wine Bottle Light

No comments:

Related Posts Plugin for WordPress, Blogger...